2025
- C. Yankowski, L. Lin*, A simple heat transfer model for annular flow condensation, International Journal of Heat and Mass Transfer, 2025, 253:127578. DOI: 10.1016/j.ijheatmasstransfer.2025.127578
- C. Yankowski, B. Mullin, L. Lin*, A simple model for heat transfer in annular two-phase flow, Paper 1148, 7th IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, June 15-18, 2025, College Park, MD
- L. Lin, M N. Milesi-Ferretti, G. Glaeser, K. Y. Kim, Measurement and uncertainty analysis of pressure losses in push-to-connect elbows and coupling, NIST Technical Note 2342, 2025, U.S. Department of Commerce, Washington, D.C. DOI: 10.6028/NIST.TN.2342
Prior to UMD:
2024
- L. Lin, M N. Milesi-Ferretti, G. Glaeser. Test facility for pressure losses in pipes and fittings for premise plumbing. NIST Technical Note 2294, 2024, U.S. Department of Commerce, Washington, D.C.
- M.A. Kedzierski, L. Lin, K. Han. Effect of micro-fin tube geometry parameters on evaporator material savings. International Journal of Refrigeration, 2024, 157, 118-126
2023
- L. Lin*, M. Kedzierski. Anomalous adverse effect of mass velocity on convective flow boiling in small-diameter microfin tubes. ASME Journal of Heat and Mass Transfer, 2023, 145(7): 071601
- L. Lin, M.D. Batista, N. Milesi-Ferretti. State-of-the-art review on measurement of pressure losses of pipe fittings. NIST Technical Note 2206, 2022, U.S. Department of Commerce, Washington, D.C.
- M.A. Kedzierski, L. Lin. A simple correlation for horizontal micro-fin tube convective boiling. ASME Journal of Heat and Mass Transfer, 2023, 145(2): 021602
2022
- L. Lin*, L. Gao, M.A. Kedzierski, Y. Hwang. A general model for flow boiling heat transfer in microfin tubes based on a new neural network architecture. Energy and AI, 2022, 8: 100151.
- L. Lin*, M.D. Batista, N. Milesi Ferretti. Measurement methods and techniques of pressure losses of pipe fittings. ASHRAE Transactions, 2022, 128(2), 473-482
- L. Lin*, L. Gao, Y. Hwang, M. Kedzierski. A neural-network approach to develop algebraic correlations for heat transfer and fluid flow. 19th International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, IN, United States, July 10-14, 2022.
2021
- L. Lin*, M. Kedzierski. prediction of lubricant viscosity from nonequilibrium molecular dynamics simulation. 18th International Refrigeration and Air Conditioning Conference at Purdue, 2021
- M.A. Kedzierski, L. Lin. Pool boiling of R514A, R1224yd(Z), and R1336mzz(E) on a reentrant cavity surface. ASME Journal of Heat Transfer, 2021, 143(5): 051602
2020
- L. Lin*, M.A. Kedzierski. Density and viscosity of a polyol ester lubricant: Measurement and Molecular Dynamics Simulation. International Journal of Refrigeration, 2020, 118: 188-201
- M.A. Kedzierski, L. Lin. Pool Boiling of R515A, R1234ze(E), and R1233zd(E) on a reentrant cavity surface. International Journal of Heat and Mass Transfer, 2020, 161:120252.
- T.J. Choi, S.H. Kim, S.P. Jang, L. Lin, M.A. Kedzierski, Aqueous nanofluids containing paraffin-filled MWCNTs for improving effective specific heat and extinction coefficient. Energy, 2020, 210:118523
2019
- L. Lin*, M.A. Kedzierski. Review of low-GWP refrigerant pool boiling heat transfer on enhanced surfaces. International Journal of Heat and Mass Transfer, 2019, 131: 1279-1303
- L. Lin, Z. Chang, G. Ding. Resuspension of deposited nanoparticles during pool boiling. International Journal of Heat and Mass Transfer, 2019, 130: 230–239
- M.A. Kedzierski, L. Lin, Pool boiling of HFO-1336mzz(Z) on a reentrant cavity surface, International Journal of Refrigeration, 2019, 104: 476-483
2018
- L. Lin*,, M.A. Kedzierski. Specific heat of aluminum-oxide nanolubricants. International Journal of Heat and Mass Transfer, 2018, 126: 1168-1176
- L. Lin, H. Peng, G. Ding. Model for predicting particle size evolution during nanoparticle aggregation in refrigerant-oil mixture. International Journal of Heat and Mass Transfer, 2018, 119: 91-104.
- M.A. Kedzierski, L. Lin, D. Kang. Pool boiling of low-global warming potential replacements for R134a on a reentrant cavity surface. ASME Journal of Heat Transfer, 2018, 140(12): 121502
2017
- L. Lin, H. Peng, Z. Chang, G. Ding. Experimental investigation on TiO2 nanoparticle migration from refrigerant-oil mixture to lubricating oil during refrigerant dryout. International Journal of Refrigeration, 2017, 77: 75-86.
- L. Lin, H. Peng, Z. Chang, G. Ding. Experimental research on degradation of nanolubricant–refrigerant mixture during continuous alternation processes of condensation and evaporation. International Journal of Refrigeration, 2017, 76: 97-108.
- H. Peng, L. Lin, G. Ding. Influence of fluorinated self-assembled monolayer on wetting dynamics during evaporation of refrigerant-oil mixture on metal surface. International Journal of Refrigeration, 2017, 79: 76-88.
2016
- L. Lin, H. Peng, G. Ding. Experimental research on particle aggregation behavior in nanorefrigerant-oil mixture. Applied Thermal Engineering, 2016, 98: 944-953.
- L. Lin, H. Peng, G. Ding. Influence of oil concentration on wetting behavior during evaporation of refrigerant-oil mixture on copper surface. International Journal of Refrigeration, 2016, 61: 23-26.
- L. Lin, H. Peng, G. Ding, Y. Lu. Effect of surfactant on particle agglomeration in refrigerant-based nanofluids. Journal of Engineering Thermophysics, 2016, 37(9): 1968-1973.
- H. Peng, L. Lin, G. Ding. Experimental research on wetting behavior of refrigerant-oil mixture on micro/nano-structured surface. International Journal of Refrigeration, 2016, 62: 207-221.
2015
- L. Lin, H. Peng, G. Ding. Dispersion stability of multi-walled carbon nanotubes in refrigerant with addition of surfactant. Applied Thermal Engineering, 2015, 91: 163-171.
- L. Lin, H. Peng, G. Ding. Prediction model of the average size of aggregate in nanorefrigerant. The 24th IIR International Congress of Refrigeration, Yokohama, Japan, 2015
- H. Peng, L. Lin, G. Ding. Influences of primary particle parameters and surfactant on aggregation behavior of nanoparticles in nanorefrigerant. Energy, 2015, 89: 410-420.